Mini Innofader S3/S9 For Fitting Pioneer DJM-S3 or DJM-S9 DJ Mixer
This is a special mini Innofader Plus modded to work with either the DJM-S3 or the DJM-S9. DJM-S3 installation uses the Pioneer Plate. For the DJM-S9, the main piece is modded plus there are an added adapter plate and two screws for mounting to the S9 mixer.
Also for the S9, as shown on the drawing, you will need to remove the channel faders to pull out the original crossfader. Also, the cable hookup is non-standard; you need to use the 3 pins small adapter cable. Make SURE you align the grey wire with the white wire from the Pioneer crossfader cable. DO NOT USE THE 4 PIN SMALL ADAPTER CABLE. IT WILL NOT WORK!
